AirForce air suspension kit

BMW3 Series E92 M32007–2011

From £1,899 inc. VAT

Part number
AF-BM-41
Model years
2007–2011
Front top mount
Rubber top mount (R)
Rear top mount
OE top mount (OE)
Lead time
about 21 working days
AirForce air suspension struts with gold-anodised top mounts and air bags
STRUTS AND BAGS · AF-BM-41

Why air on this car

The BMW 3 Series E92 M3 pairs a naturally aspirated V8 with a coupe body wider over its wheels than the standard 3 Series, so the front splitter is first to suffer once an owner drops the car on fixed coilovers. Speed bumps, driveway aprons and car park ramps all become a calculation.

Air suspension removes that decision. You can drop the car low for a show, lift it for the school run, then settle back down for a proper drive. The E92 works as a track car and a daily one, so raising the nose before a speed bump matters more here than on most.

The front struts use a rubber top mount as standard, keeping things quiet and close to the factory feel, with the option to specify a pillowball mount, a spherical bearing giving sharper, more precise steering at the cost of slightly more road noise. Cost and control scale together: entry tiers keep things affordable, upper tiers add corner-by-corner and height-sensor control with proper presets.

What's in the kit

Struts and bags

Struts and bags is the air suspension hardware without any management: four vehicle-specific struts with 36 levels of damping adjustment and the air bags that go on them. Choose it if you already run management you want to keep, or you are buying the RC1 or RC2 controller and tank separately.

Who it suits: Owners keeping their existing management or choosing their own, who need only the struts and air bags.

  • Four vehicle-specific struts and four air bags
  • 36 levels of damping adjustment
  • No tank, compressor, valves, remote or wiring included
  • For existing management or separately chosen RC1/RC2
  • Bolt-on fit, no cutting or welding
  • Rubber top mount standard; pillowball optional
Contents
Struts × 4 with air bags; no management
Damping adjustment
36 levels, all four struts
Top mount (standard)
Rubber on McPherson struts; pillowball optional for camber adjustment
Fitting
Bolt-on; original dampers not reused
Drive
Applications are 2WD unless 4WD is stated

Fitment notes

  • Front top mount: Rubber top mount. The standard fitment on McPherson-strut cars. Rubber isolates the body from the strut for the quietest ride, at the cost of a little precision. Camber is not adjustable on this mount.
  • Rear top mount: OE top mount. The kit reuses your car's original top mount rather than supplying a new one. Ride feel and camber stay as the factory set them.
  • A pillowball front top mount (camber adjustable) is available as an optional upgrade — there is a surcharge for changing the standard top-mount setting. Ask us when ordering.
  • Built to order — the typical lead time is around 21 working days from the date of purchase to UK delivery. We confirm the lead time for your kit before you pay.

Five years against oil leaks, with a service every two years

AirForce covers its air suspension struts against oil leakage for five years. To keep that cover, the struts need to come back for inspection and maintenance every two years; the manufacturer treats the service as a condition of the warranty, so book it in and keep the paperwork.

Damage caused by suspension components rubbing against an inflated air bag is not covered, which is why we ask your fitter to cycle the system to full height and check clearances before they hand the car back.

Compressors, air bags and the electronic control box and remotes carry the manufacturer’s separate terms, and electronic parts may need to go back to the factory for repair. Ask us for the current wording before you order.

None of this affects your statutory rights as a UK consumer. If a product is faulty, your rights under the Consumer Rights Act 2015 apply alongside the manufacturer’s warranty, and your contract is with us as the retailer.